[maan_sunny]

Hello everyone, i hope that all of you are in good health.
I need help from you people. I have a Turning center (Doosan Puma 280LM) and yesterday i faced a problem i.e an alarm or error message. Machine is running and operating properly and there is no effect of alarm on machine operations until now.
But i think there is a possibility that could lead the machine to bigger problem, therefore i want your kind help.
i have attached the error/alarm pictures and also some other pictures. There is no description of alarm in alarm window as shown in picture.
Kindly look into these pictures and help me. Thank you.

[dhardt]

That is a reminder from the Scheduled Maintenance timer/counter.

It can be reset.
It can be altered (change the duration amount).
It can be turned off.
The attached documents will show how...

[maan_sunny]

That is a reminder from the Scheduled Maintenance timer/counter.

It can be reset.
It can be altered (change the duration amount).
It can be turned off.
The attached documents will show how...

Thank you very much for your help...

[dhardt]

Thank you very much for your help...

Anytime.

[bertus.nl]

Hi

i had text in the same position "APC alarm" then the batery is low. on a 2600m

greetings bertus

[dhardt]

That is the location where many alarms and messages display.