Does anyone know how my SAUTER tool changer must connect to my MACH3 / CS Lab board + the necessary VB script (do not know if the CS Lab VB script is ok for this turret or adjustments are needed)
The schedule of the sauté turret can be found in the link.
Sauter Toolchanger
https://plus.google.com/u/0/10346040...06696862436749
CS Lab board
CSMIO/IP-S - 6 axis Ethernet Motion Controller (STEP/DIR) with connectors - CS-Lab CNC controllers CNC Machining CNC software
VB script
Toolchange MACROS samples - CS-Lab CNC controllers CNC Machining CNC software
Thanks in advance,