hi.
i am having a problem with one of the lathes at my work. and was wondering if anyone could help. first off a little info on the machine. it's a hitachi seiki, with fanuc 3t-f. the problem we are having with it is using rs-232 we can put programs into memory. but we cant dump them back to the PC. we're using the same cable for several other machines using both fanuc and yasnac controls, with no problems.
if it will help here is all the rs-232 related parameters i could find while reading through the maintaince manual, as they are currently in the machine.
0005=00000011
0013=00000000
0014=00000001
0068=1200
0069=1200
tvon=0
iso=1
i/o=1
any help would be greatly apreciated.