First i'm a collegian in Thailand. I have a project for graduated and have a 4 months left
I want to know .Is the mach3 can run on laptop intel core i-5 with OS WIN7 74bit
Can anyone help me maybe give me the resource for understaning it(flame2)
First i'm a collegian in Thailand. I have a project for graduated and have a 4 months left
I want to know .Is the mach3 can run on laptop intel core i-5 with OS WIN7 74bit
Can anyone help me maybe give me the resource for understaning it(flame2)
Hi , you can install Match 3 in your computer but if you want use your paralell port it doesn't work.
Match 3 with pararell port only work with XP + 32 bits.
I had that problem and I had to change to Linux - CNC.
I hope that information can help you.
The Mach3 parallel port driver does not work in Windows 8 or any 64 bit OS.
If you want to use your laptop, you'll need to use an enternal USB or ethernet motion controller.
The UC100 and Pokeys are probably your cheapest options.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I am looking for (XHC-shuttlePro.dll) file
Can anyone email it to me.
[email protected]
Thank you,
Phil