[jcsb]

I am building a new sump and was curious which 3/4 hp coolant pump some of you guys used?
John

[WOTDesigns]

On my TM2P I have the factory HAAS high pressure pump. On my Tormach I use a 3/4 hp pp from Harbor Freight. The HAAS definitely had more pressure, but the HF one works well with three 1/4" lines and a garden hose for wash down both fed by 5/8 ID tubes

Brian
WOT Designs

[jcsb]

On my TM2P I have the factory HAAS high pressure pump. On my Tormach I use a 3/4 hp pp from Harbor Freight. The HAAS definitely had more pressure, but the HF one works well with three 1/4" lines and a garden hose for wash down both fed by 5/8 ID tubes

Brian
WOT Designs

Brian,
Is the Haas pump single phase?
John

[WOTDesigns]

No, it is 3phase. They convert the main power to the machine to 3phase if ordered with the HP pump which I preferred anyways.

Brian
WOT Designs

[jcsb]

No, it is 3phase. They convert the main power to the machine to 3phase if ordered with the HP pump which I preferred anyways.

Brian
WOT Designs

Brian,
Thanks. I have 208v three phase going to the machine so I could put a relay on it for three phase.
John