Does anyone have the pins and ports assignments for the TS3040-H80? My spindle comes on and stays on and my x, y, z motors do not respond at all.
A couple have tried to help but I need simple X: - -, Y: - -, Z: - - and so on.
Thread: Dongda Tonsen CNC
Results 1 to 1 of 1
-
12-27-2014, 05:33 PM #1
Registered
- Join Date
- Nov 2014
- Posts
- 21
Dongda Tonsen CNC
Reply With QuoteSimilar Threads
-
Tonsen - eBay ReadyToRun Mill
By mr_westie in forum Benchtop MachinesReplies: 275Last Post: 01-09-2015, 05:01 PM -
Tonsen TS-340C-H80 Help!
By andyblue1234 in forum Chinese MachinesReplies: 2Last Post: 12-30-2014, 03:58 AM -
TONSEN TS3040C-H80 breakout board
By ZZRBlokey in forum Chinese MachinesReplies: 8Last Post: 11-15-2014, 08:10 PM -
Dongda Machines not safe ......?
By rgammage in forum Chinese MachinesReplies: 0Last Post: 01-11-2014, 10:31 PM -
Tonsen TS3040C-H80 - replace spindle directly on Z axis?
By bearer in forum Chinese MachinesReplies: 10Last Post: 04-28-2013, 10:21 AM
Tags for this Thread
Posting Permissions
