On REF-POINT on X axis I get message "1120 Clamping Monitoring". The machine has 3 axis X Z C. The Z axis is doing the REF-POINT normally. Attached are my software and hardware versions
On REF-POINT on X axis I get message "1120 Clamping Monitoring". The machine has 3 axis X Z C. The Z axis is doing the REF-POINT normally. Attached are my software and hardware versions
Hello,
I think you need to talk to an expert because you have a C-axis, but go to the Siemens Web site and search on the 840T.
They also have some support. The site is a bit erratic built but try to understand how the tree structure and move on.