586,032 active members*
2,896 visitors online*
Register for free
Login

Thread: chiron m/c

Results 1 to 5 of 5
  1. 10-10-2006, 05:37 PM #1
    praveen224
    praveen224 is offline Registered
    Join Date
    Sep 2006
    Posts
    3

    chiron m/c

    hi guys,
    we have chiron wm02 m/c and its coolant is not working in auto..
    so we have given a manual control for coolant... but still its not good.the probe is getting wet and its getting spoiled..would somebody tell me how to run coolant in auto plz..
    thanks
    Reply With Quote Reply With Quote
  2. 10-11-2006, 10:40 AM #2
    BMackinnon
    BMackinnon is offline Registered
    Join Date
    Feb 2006
    Posts
    103
    have you looked in your machine's manual ?
    are you using M08/M09 in your code ?
    Reply With Quote Reply With Quote
  3. 10-12-2006, 06:44 PM #3
    praveen224
    praveen224 is offline Registered
    Join Date
    Sep 2006
    Posts
    3
    we are using m09 code..
    and the output from cnc is not coming to the relay..
    Reply With Quote Reply With Quote
  4. 10-12-2006, 09:51 PM #4
    BMackinnon
    BMackinnon is offline Registered
    Join Date
    Feb 2006
    Posts
    103
    I dont really understand what you are trying to say ...
    are you saying that when it reads M08 the coolant is not coming on ...
    are you saying you are using M09 to activate it...
    are you saying that it is an electrical/computer problem...

    a little more information would be helpful in aiding you with your problem
    Reply With Quote Reply With Quote
  5. 10-13-2006, 12:32 AM #5
    cncatj
    cncatj is offline Registered
    Join Date
    May 2006
    Posts
    82
    Try this : in MDI mode enter: M8 M18 M118 push start.
    all 6this will activate all your coolant pumps.
    Good luck!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules