[brunobernadetei]

hi

i ve a lxj6090 laser machine with lasercut 6.1. The software can't communicate even by usb or tcp ip with the laser because i dont have the good drivers. The board is a mcp6585 and the drivers send by the manufacturer is for others versions. I try to have the right driver by letto but no response.

My laptop is on sevenpro sp1 x64. if someone has the good drivers and can post it.

thanks you

B BERNADET

[ggmaury]

I'm new in this forum and I have the same problem, the software says "communication failure" and it seems it's a driver problem also.

Attachment 299978

The MPC6585 definetely works with windows 7/64 bits because it has that directoriy and has two dll files in it (LaserPrinter_Driver.dll and LaserPrinter_UI.dll).

Attachment 299980

If anyone get the drivers please share them.

Gabriel

[ggmaury]

The drivers and all stuff can be dowoaded from leetro, still don't lnow if that fixes the problem but here they are:

http://www.leetro.com/english/sale/1-3.html

[brunobernadetei]

hi

i try with a windows home 7 family and this system seem ok. i have no communication failure so often.

i use this drivers send by leetro

LTUSBDrvSetup_V4.0.rar

nono

[DJNPHOTO]

I went back to the last drivers no issues so far

Sent from my SCH-R970 using Tapatalk

[DJNPHOTO]

I went back to the last drivers no issues so far

Sent from my SCH-R970 using Tapatalk

Also running windows 7


Sent from my SCH-R970 using Tapatalk