Hawk 150
A2100 Control

1. Machine would not turn on - blank screen with a 1"x1" square in the center of the screen.
2. Changed cmos battery, reset time and date and checked cmos setup parameters.
3. Machine boots fine but is missing keyboard/touch screen. We have a mouse and keyboard hooked up to get past the touch screen not working.
4. Here is the problem, besides the touch screen not working everything seems fine, when I go to power the machine On by pressing the green button nothing happens. I have tried checking the I/o board but it is not reading the slot/rack numbers.

Is there away to power on the machine other than pushing the green button?


Thanks