Looking for advice/ tips/ tricks/ for 3D C axis live tooling paths. I am new to Master Cam and am trying to program text engraving wrapped around 3" a cylinder. My issue is that I can graphically verify it in Master and it looks pretty good, but when I run a dry graphic of the posted code in my machine, there are shloads of extra C position moves and somewhere in there are my letters. And some info on how to post speed and feed changes would be cool.
Please help.
Thanks
Thread: Live tooling OSP posting for X-4
Results 1 to 4 of 4
Hybrid View
-
02-03-2015, 02:35 AM #1
Registered
- Join Date
- Oct 2012
- Posts
- 59
Live tooling OSP posting for X-4
-
02-04-2015, 10:11 PM #2
Registered
- Join Date
- Jun 2008
- Posts
- 372
Re: Live tooling OSP posting for X-4
Sounds like your post has some errors
-
02-05-2015, 03:04 AM #3
Registered
- Join Date
- Oct 2012
- Posts
- 59
Re: Live tooling OSP posting for X-4
Yeah that's what I'm thinking thanks
-
02-06-2015, 03:22 AM #4
Registered
- Join Date
- Oct 2012
- Posts
- 59
Re: Live tooling OSP posting for X-4
I fallowed the explicit instructions in this link and it seems to have straightened things out fyi...
Tutorial 8-9 C-Axis Contour
Reply With QuoteSimilar Threads
-
Live tooling
By mattlynx in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 01-20-2014, 10:44 PM -
Anyone ever hear of "live tooling" or "dynamic live tooling" in verticle mills?
By entCNC in forum MetalWork DiscussionReplies: 2Last Post: 08-09-2010, 04:17 PM -
diy live tooling
By seawolf217 in forum Haas LathesReplies: 3Last Post: 06-09-2009, 04:07 PM -
live tooling
By guhl in forum FanucReplies: 0Last Post: 02-12-2008, 08:43 AM -
What is Live tooling versus "non-live tooling"?
By squale in forum Uncategorised MetalWorking MachinesReplies: 8Last Post: 11-15-2007, 09:38 PM
Tags for this Thread
Posting Permissions
