[nperry]

So I messed up good... I some how erased some parameters while trying to clear an error. Does anyone have a parameters list on their Sl-1 I can cheat from. No unfortunately I did not back up the parameters and yes I have learned my lesson. Also is there a list that describes what each parameter line does?

Thank You

[fordav11]

there is a list of 6T parameters in the back of the operator manual with descriptions. start there first, type them in then power off/on and see what doesn't work.
you should try to get a proper backup from the same model machine. there could be a backup around on here too, its a common machine/control.

[immi1919]

So I messed up good... I some how erased some parameters while trying to clear an error. Does anyone have a parameters list on their Sl-1 I can cheat from. No unfortunately I did not back up the parameters and yes I have learned my lesson. Also is there a list that describes what each parameter line does?

Thank You

I have the parameters fanuc 6t -B

[immi1919]

I have the parameters fanuc 6t -B

[email protected]
Any time

[anglhua52023520]

[email protected]
Any time

thanks