586,590 active members*
2,329 visitors online*
Register for free
Login

Thread: Simple Turning/grinding(?)

Results 1 to 4 of 4
  1. 10-16-2006, 02:52 AM #1
    zcases
    zcases is offline Registered
    Join Date
    Apr 2005
    Posts
    345

    Simple Turning/grinding(?)

    Due to the lack of interest in forming the parts for my "Wire Forming" RFQ, I thought I would try this.

    I just need 316SS, .094 diameter, length 2.345 +/- 0.010, with a sharp tip ground or turned on one end at a 0.100 +/- .010 length. Quantities are 200, 400, 800 and 1200.

    Thanks,
    Scott
    Reply With Quote Reply With Quote
  2. 10-16-2006, 05:50 PM #2
    Derek.C
    Derek.C is offline Registered
    Join Date
    Nov 2005
    Posts
    73
    Probally around 2.00 or less apeice
    Reply With Quote Reply With Quote
  3. 10-17-2006, 06:06 PM #3
    SeaSchell
    SeaSchell is offline Registered
    Join Date
    Sep 2006
    Posts
    49
    You have PM
    Dave Schell, SeaSchell Tackle Machining/Mfg./Design [email protected] 619 562-1835
    Reply With Quote Reply With Quote
  4. 11-17-2006, 04:49 PM #4
    merl
    merl is offline Registered
    Join Date
    Nov 2006
    Posts
    114
    zcases/Scott
    the quote you wanted is in your PM box
    Thanks
    merl
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules