[bertcnc]

Please can anyone tell me where I can get THE DATA TABLE: KEEP RELAY AND
PC TIMER PARAMETERS FOR A YAM CK2 CNC LATHE 10 TF.CONTROL I have a copy of everthing else but these pages are missing. I can't find any agents for these machines. Any help would be appreciated.:

[bradodarb]

I had the same problem, I posted here with no replies.

One day I was talking to Jon at Fanuc America about a different machine. While we waited for his computer to inform us of part ability I asked him if Yam were extinct an unserviceable. He directed me to servitrol? I don't think that is it-I will look for the info tomorrow at work. At any rate I did call the company and they were extremely helpful. I gave them the serial and model numbers and within two days I had a complete parameter set.

I only paid $1000.00 for this 8,000 lb monster. I originally only wanted it for the red caps, but once I got her working I decided against stripping it down.

Nice pieces of old iron.



Send me a reminder pm and I will try to get that contact info tomorrow.


Cheers,

Brad

[bertcnc]

Thanks for the reply Brad.
I managed to find a company with a CK5 .They let me download the parms from their machine. I installed these and with a few changes here and there I
got the machine going. Excellent lathe but not as cheap as yours unfortunately.
Thanks Again,
Bertie

[GPena]

Hi Bertie, I am trying to get the parameters and PC parameters for my CK-2 with Fanuc 10T controller, could you please share them? Our machine is down.

I hope you can help me.

Thank you.

[Lene Madsen]

Bertcnc, GPena.

Did any of you get your hands on a list? I need keep relay list and data for my CK-1, Fanuc 10T, if anyone have one?