Out of these two stepper motor specifications which one would you choose and why? The motors are going to be used for a CNC plasma cutter/CNC router. The linear motion is created by 3/4 inch Acme threaded rod.
Attachment 268424Attachment 268426
Out of these two stepper motor specifications which one would you choose and why? The motors are going to be used for a CNC plasma cutter/CNC router. The linear motion is created by 3/4 inch Acme threaded rod.
Attachment 268424Attachment 268426
Neither. The inductances are too high to perform well with low cost drives. But if I had to choose, the second looks better. Lower inductance, resistance and detent torque.