Originally Posted by
RAC
When you turn the NC on, a message appears that says "turn the NC off, push "M" and "0", and power up, some functionality will be lost".. . . . .
The number for the control is A20B-0236-B628, and neither Fanuc nor Toyoda seem to be able to help, since both say that the initial meesage is not theirs (it appears in red Japanese, with a rough english translation below it). . . . . .
Oh and by the way, . . . . I have done a clean System Data and S-Ram install from a brother machine to this one. Thanks a lot.
Did you install the data from the Brother before or after the coolant bath? Perhaps this explains why Toyoda & Fanuc do not recognize the error message?
Paul Sevin - Ovation Engineering, Inc.
http://www.ovationengineering.com