Hi Group,
I've been a member for a while, but haven't participated before. I've got a question regarding axis stepping. Simply, how do I jog the 4th axis?
Thanks
Thread: A axis jogging
Results 1 to 5 of 5
-
10-19-2006, 04:36 PM #1
Registered
- Join Date
- Aug 2006
- Posts
- 3
A axis jogging
-
07-19-2009, 04:53 PM #2
Registered
- Join Date
- Sep 2005
- Posts
- 371
Originally Posted by mikeward2121
Well this one didn't get answered in the forum. Now I have the same question.
Any takers?
-
07-19-2009, 05:57 PM #3
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Just go to Config>Hotkeys and assign any keys you like to jog it.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
07-19-2009, 07:14 PM #4
Registered
- Join Date
- Sep 2005
- Posts
- 371
Looks like two good ones for "A" are (+) & (-). Originally Posted by ger21
Found it here:
http://www.cnczone.com/forums/showpo...&postcount=243
-
07-20-2009, 03:02 PM #5
Member
- Join Date
- Jun 2007
- Posts
- 3757
next to z-keys
The home and end keys are next to PGUP and PGDN (z keys)
Works for me.
Reply With Quote
Posting Permissions
