We have an HPR 130 XD and I have been asked to quote for cutting some 32mm thick mild steel profiles.
According to the sales literature the machine has a production pierce capacity of this thickness but in the cut charts (manual and auto gas consoles) it states that for this thickness an edge start is required.
Has anyone had any experience with this please?
Thread: Pierce capacity of HPR130 XD
Results 1 to 1 of 1
-
02-26-2015, 11:14 PM #1
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 58
Pierce capacity of HPR130 XD
Reply With QuoteSimilar Threads
-
Hypertherm HPR130 upgrade to XD
By rooies13 in forum Hypertherm PlasmaReplies: 0Last Post: 03-15-2014, 04:45 PM -
Any G or M code of SteelTailor controller for pierce height, pierce time and kerf?
By Steel Tailor in forum Other Machine TopicsReplies: 0Last Post: 11-20-2013, 08:34 AM -
need service tech whitney hpr130 in california
By jcazares in forum Mentors & Apprentice LocatorReplies: 1Last Post: 08-18-2011, 02:20 PM -
Wanted HyPerformance Plasma HPR130
By noeld in forum Waterjet General TopicsReplies: 8Last Post: 02-08-2011, 04:45 PM -
CNC pierce capacity increase - torch rotation?
By ASTRO_AL in forum Waterjet General TopicsReplies: 11Last Post: 04-11-2008, 01:57 AM
Tags for this Thread
Posting Permissions
