[arminmen]

E09-001C E09-001C
CHARACTER RAM OK
FIFO READY
WORK RAM OK

when turn on the machine that we appear on the screen does anyone know what is the word ? you might ask for help

[arminmen]

machine is Fanuc tape cut W2 wire 1988

[fordav11]

those messages don't look like Fanuc
which control do you have?

[agering]

This message speaks of that passes test of the colour monitor which has its CPU, memory, FIFO, e.t.c.
The Message has a green colour.
If on this test is stop then may be is not started CNC system CPU or is breakaway of cable the CNC<->monitor.

[arminmen]

Fanuc-Japan
CNC tape cut W2 1988 god

[arminmen]

kad se upali masina samo ovo stoji na monitoru kao na slici.
da li je moguce da je do kabla koji povezuje cnc --- monitor ??

[arminmen]

when it comes on just this machine stands on the monitor as shown.
is it possible that it is up to the cable that connects the monitor cnc --- ??

[arminmen]

Do you know who performs repair motherboard and price ?

[agering]

Please, tell me your PM.
What type Mother Board have you?

[arminmen]

ovo mi je maticna ploca evo serijski broj Attachment 272494

[memoryman]

That is a 0-B motherboard; there are several other versions (-0285, 0286) which have slightly different configurations.
What country are you in?

[arminmen]

That is a 0-B motherboard; there are several other versions (-0285, 0286) which have slightly different configurations.
What country are you in?

Bosnia and Herzegovina
Bugojno 70230

[memoryman]

I don't know how difficult it is to get any service in your country; once you are sure that the motherboard is the problem, it may be cheapest to get it exchanged .

[DHYSTA]

Hi Arminmen, finally how did you solve the problem ? I'm having the same problem on Tape Cut W0 with Fanuc 0 B.

[ANILMANJWANI]

Hi I'm having the problem on Tape Cut W2 with Fanuc 0 B.
E09-001C E09-001C
CHARACTER RAM OK
FIFO READY
WORK RAM OK

when turn on the machine that we appear on the screen does anyone know what is the word ? you might ask for help