Hi Gentlemen!
Just started first day at work and found myself with daewoo dmv 2040, 21i Fanuc controller.
Wasn't able even to run it. I managed to do jog, unclamp and manual stuff, but no spindle rotation. The machine did not react to cycle start in MEM mode. Operations in MDI mode also refusing to execute.
The only indication I have is blinking red "RMT DGN", remote diagnosis I guess. In detailed massage it shows "RS 232c Error (5)".
Oil checked , Nc alarm light checked, all axis in zero pos, doors security checked. (The RS 232 component is missing. This is old machine and there is a hole instead of the 21 pin plug)
PLEASE help. I need to show them that I know something. Wasted 5 hours pushing buttons and no result.
Attachment 404424