Hello! We have been struggling with our FX25II for a while already and I'm hoping to find some good tips here.
The problem started when the machine refused to power up, but after turning the switch on and off very fast for some time it does power up. The hydraulics seem to work also. But even at this point we cannot get the spindle turning. Sometimes after changing the direction or turning off the spindle locking it might turn just a little and stop. There is red "busy" light lit all the time and we cannot get it off. Also after some time we get alarm with a code 00001.
So does anyone have any ideas where to start searching the cause for this? We have already checked fuses and some of the relays.