hi all need help on write 5 axis post head/head for mach 3
anyone have a src file and lib. file . sample
i had use the 5axis template in the upg , unfortunenately; the code
did not come out as i exspected . the G code come out for table table config
i had changed the kin file to #4 head/head and it still come out the same
maybe some place in the lib i have to change .please help
code for drill cycle for mach 3 sample drill on the angle
sample
(******************** DRILLL 2 HOLES LEFT SIDE ***************)
G0 G54 G90 X-1.3837 Y4.807 C-90. B-15.
G43 H2 Z2.2766
X-1.1895 Z1.5522
G1 X-1.1766 Z1.5039 F15.
G0 X-1.1895 Z1.5522
X-1.1921 Z1.5618
G1 X-1.1637 Z1.4556
G0 X-1.1895 Z1.5522
X-1.1792 Z1.5135
G1 X-1.1507 Z1.4073
G0 X-1.1895 Z1.5522
pivot = 4.5 " OFFSET AROUND B AXIS
OFFSET AROUND C AXIS 3.807