Hello,
I have the machine OSP5000M-G OKUMA.
I need the transfer program from PC to CNC by RS232 but I can not change the parameter #57 from 0 to 1
It error not design.
Thank you.
Hello,
I have the machine OSP5000M-G OKUMA.
I need the transfer program from PC to CNC by RS232 but I can not change the parameter #57 from 0 to 1
It error not design.
Thank you.
have you tried hitting the SET button first then typing in 0 or 1
Hello,
I change #6, #34 and #45 all ok, only #57 no ok.
This document is content needed parameters.