[whimsical]

I just received my 5 servos and drives and wanted to try the tuning software before installing them.
I received the serial cable but didn't get the software disk with the package. Looking for the file on the DMM site I can't find it anywhere.
Its Sunday here and i'm 14 hours different to Canada And can't try my new toys
Any ideas where i can download it

Mike

[whimsical]

No replies so no weekend playing.
DMM sent me the files last night so now wait till next weekend.
They sure look nice.
Bugger may have to have a day off work, can't wait till next weekend to try them

[boss4]

Can someone send me the DMMDRV software please?

I just got 3 drives with no software. Maybe put on drop box and send the link via PM?

Or this Free File Hosting - Online Storage; Upload Mp3, Videos, Music. Backup Files

I am hoping to work on this over the weekend.

Thanks!

[mactec54]

boss4

What Drives do you have, a photo would be best

[boss4]

they are DYN4-H01A2-00

here is a photo:

Attachment 292858

Thanks!

[mactec54]

boss4

If your motors are not connected to your machine, then only use low settings in the top 3 boxes

https://app.box.com/s/dw743of6v36b2qfzz2xj

[mactec54]

boss4

When you get to the settings window, this is what it needs to look like, this will get you going, for a test run, in the software, when you move to your control, you will have to set, on the right hand side, to Pulse/Dir

Then do a Save all, then before you leave do a Read

When connected to your machine the Top row will have higher numbers than what I have shown, for a motor that is not connected to your machine

Each axes you have to assign a Drive number in this software X axes is ( 0 ) Y axes is ( 1 ) Z axes is ( 2 )

Any changes you make while playing with the numbers you need to do a Save All every time you Change a number,

Only the top Line and the third line are the settings you have to change, the rest don't apply

Gearing is set to 500 for step/dir use, and 127 for on position