[adamboon]

I noticed under the direct download for the V1.5 Pathpilot, -

http://www.tormach.com/document_dire...tml?doc_id=900

the release notes are up to V1.6 with a release date of March 24,2015 (today). Has anyone been able to download the V1.6 update? And where do I get it from?

Adam

[adamboon]

I noticed under the direct download for the V1.5 Pathpilot, -

Direct Document and Software Download | Tormach Inc. providers of personal small CNC machines, CNC tooling, and many more CNC items.

the release notes are up to V1.6 with a release date of March 24,2015 (today). Has anyone been able to download the V1.6 update? And where do I get it from?

Adam

Found it:

Direct Document and Software Download | Tormach Inc. providers of personal small CNC machines, CNC tooling, and many more CNC items.

[popspipes]

http://www.tormach.com/pathpilot_tracking.html#history

link to the download site

[MFchief]

I haven't had a chance to do any updates yet. Does anyone know if you need to do them sequentially, or can I do v1.6 without doing v1.5?

Terry

[popspipes]

Terry,
I downloaded both and put them on a usb drive, then installed both on the machine computer, it doesnt take long at all, I did them sequentially, I dont know if that makes a difference or not.

[MFchief]

I will likely do the same, unless someone can say it isn't needed. They are small enough that it doesn't really take much time.

Thanks
Terry

[hall6ppc]

I will likely do the same, unless someone can say it isn't needed. They are small enough that it doesn't really take much time.

Thanks
Terry

I went from V1.4 to V1.6 without installing V1.5 with no problems .