Any one know the proper name and source of this type of plug. I need to find a 7 terminal one for my BobCAD 5050 router. It has BobCAD's name on the control box but would suspect Aniheim Automation built it. The top socket is for the limit switch s. The others in the picture are the motors, but should give you an idea of what I am looking for.
Thanks
Thread: Pluggable terminal block?
Results 1 to 3 of 3
-
10-28-2006, 05:02 AM #1
Registered
- Join Date
- Sep 2006
- Posts
- 39
Pluggable terminal block?
-
10-28-2006, 05:12 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Practically all the terminal manufacturers make them, Weidmuller, Entrelec, Phoenix contact, Tyco-Amp. They are ordered by pin spacing .2", 6mm, etc.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
10-28-2006, 02:41 PM #3
Registered
- Join Date
- Sep 2006
- Posts
- 39
That helps. I do see a 5mm on one side of the plug and what I think is P60 on the other. I think I figured out the 5mm but what is the P60?
I found this one at http://www.riaconnect.com/_assets/catalog/tb_93.pdf
Reply With Quote
Posting Permissions
