Hello guys,I built my DIY CNC hot wire cutter and decided to post a new topic to show you what I made.

The motors and the driver board are bought from eBay,the dealer is longsmotor.
It is not something special but I am a beginner and I think it is pretty good for beginning.

I used a wood construction because I don't have intention to use it for a commercial purpose.

I use 0.300 mm kanthal with ressistance 19.1 ohms/m and the current I use to heat the wire is 1.3 amps.

You can freely express your opinion and tell me what you like or dislike and if you don't understand something just ask.