[claudiu220405]

Hello guys,

I have just got SolidCam 2015 and I have a problem.
If I have a part opened and choose from Solidcam New->Milling, solidcam close the part and then I have this error "to create a new cam-part you must have already open solidworks document", every time I want to mill a part I must open it twice to can start the milling operation.

Anybody have any sugestions?

This is so annoing.

Waiting for an answer soon as possible.

Thanks guys.

[AllenManDrake]

Hello guys,

I have just got SolidCam 2015 and I have a problem.
If I have a part opened and choose from Solidcam New->Milling, solidcam close the part and then I have this error "to create a new cam-part you must have already open solidworks document", every time I want to mill a part I must open it twice to can start the milling operation.

Anybody have any sugestions?

This is so annoing.

Waiting for an answer soon as possible.

Thanks guys.

Like it says you have to have the part opened in SolidWorks first if that's what you have to CAD software. Have you tried that?

[claudiu220405]

I work with Solidcam for 7 years, and I have few knowldege, has I mentioned, I have the part opened, but solidcam close it and then I get that error.

Thanks for answer anyway.

Greetings.

[AllenManDrake]

I work with Solidcam for 7 years, and I have few knowldege, has I mentioned, I have the part opened, but solidcam close it and then I get that error.

Thanks for answer anyway.

Greetings.

I have had that happen on occasion so I'm trying to remember what was wrong at that time. What version of SolidWorks are you using?

[claudiu220405]

SolidCam 2015

[AllenManDrake]

SolidCam 2015

Yes, SolidCAM 2015. What version of SOLIDWORKS are you using?

[claudiu220405]

SolidWorks 2014 SP1 with Solidcam 2015 SP1

[muhammed37]

Yes, SolidCAM 2015. What version of SOLIDWORKS are you using?

en iyisi 2017

- - - Updated - - -

solidcam 2017 kullan?yorum

[claudiu220405]

Hello,

I finaly made it work.
I installed SW2014 SP4 and SolidCam 2015 SP3.
Any other methods do not work.

Hope I helped somebody.

Have a great day everyone.