We have a computer running a MACH 3 software and we know we need a breakout board to put in between the computer and the Step Motor Driver pack from Anaheim Automation part number DPF72004. We just don't know what type or kind of breakout board we may need. The CNC is 4 axis. Please help!
Results 1 to 2 of 2
-
04-07-2015, 06:55 PM #1
Registered
- Join Date
- Apr 2015
- Posts
- 2
What Breakout Board/Box Do I Need?
-
04-17-2015, 04:32 AM #2
Registered
- Join Date
- Oct 2013
- Posts
- 18
Re: What Breakout Board/Box Do I Need?
If you have a DPF72004 and its functioning you need to have a cable to connect your PC to it and the cables to connect the stepper motors to it. I have the 72003 which I am in the process of fixing. Here is a link to AA webpage with good info. DPF72004 - 2.6-7.0A Current Range - Stepper Drivers with 110 VAC or 220 VAC Input
Reply With QuoteSimilar Threads
-
BREAKOUT BOARD INTERFACE BUFFER BOARD
By deslee in forum Servo Motors / DrivesReplies: 1Last Post: 08-17-2014, 07:32 PM -
breakout board
By linkintiger in forum Maintenance DIY DiscussionReplies: 0Last Post: 01-27-2011, 06:43 AM -
Help: anyone know this breakout board?
By fabribi in forum Open Source Controller BoardsReplies: 1Last Post: 02-21-2010, 12:20 PM -
BREAKOUT BOARD
By BOBINETTE in forum Stepper Motors / DrivesReplies: 0Last Post: 07-10-2009, 04:24 AM -
Breakout board, Relays on board?
By Cooper in forum Open Source Controller BoardsReplies: 11Last Post: 06-10-2007, 01:55 AM
Tags for this Thread
Posting Permissions
