Originally Posted by
wallisweld
Hey I have a few questions im hoping someone can help me out with.
Im trying to hook up my HT2000 power supply to my edge pro controller, some detail this a used HT2000 but everything works as far as I The edge pro controller is brand new.
I have everything hooked up gas lines and all cables from he HT 2000 to RHF and motor control valve etc. The last cable I need to hook up is the 1x1 from the I/O pin connector on the HT 2000 to the I/O pin connector or wires coming out of the Edge Pro?
I have read the manual but I still cant figure it out? I have used a volt meter and I can see with wires from the edge pro get power when I manually turn on the outputs
As far as the rest of the out put X Y Z all work, its just the plasma does start up.
If I touch lugs 9 & 15 together on the 1x1 cable coming from the plasma the touch will fire up for a second.
If someone has some tips or could point me in the right direction that would be much appreciated!
Thanks