We recently acquired a used Tsugami Mercury Fanuc 6t last friday. Its powered up and we have been trying to get use to the controls. We tested the spindle, we tested the tool change and it was working. Then we tried to make a test program.
Ever since we tried to make this test program, we have been unable to do a tool change. We keep getting an "Alarm 913 Prog". This alarm number is not listed in the operator manual at all, and we are clueless to what could be the problem.
ps. The werent even able to make the test program because as soon as we named it O6000 it gave us an alarm. After that like i said before the tool change has not being functioning. Spindle still works.
Maybe we kicked something when we tried to name this program? Oh yea and we have restarted the machine. Please somebody help. We are stumped...