Hey I'd be interested.. the only problem is my machine isn't up and running [just yet] its close but.. I'll have a 8'6" x 18' x 4' machine envelope when its done.. I'd love to make you some molds for the whole hull as well as the other flat parts. If your looking to do this over the next couple years and can wait for 2-3 months until my machine is up and running, I'd be interested if not.. well I hope someone pipe's up and is able to route your parts.
Either way good luck w/ your project! It's exciting to get-er started isn't it
Jerry
JerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)