I have a client who has a thc of Hypertherm model PHC Sensor, and want to integrate it with a machine with mach3 this thc work only with the signals START and deactivation in the corner of the entrance and ARC output OK.
How do I configure mach3 to enable an exit when you're in the corner and disable this output when it is no longer in the corner?
Results 1 to 1 of 1
-
04-24-2015, 02:54 AM #1
Registered
- Join Date
- Jun 2013
- Posts
- 29
Hypertherm PHC Sensor with Mach3.
Reply With QuoteSimilar Threads
-
Hypertherm Sensor PHC Torch Height Control
By Pure-Powder in forum Waterjet General TopicsReplies: 47Last Post: 08-29-2019, 04:46 PM -
KCR-HD3070 Project: Retrofit Komatsu Rasor KCR-0951 w/ Hypertherm HD3070/Sensor PHC
By racesol in forum Plasma, EDM / Other similar machine Project LogReplies: 9Last Post: 03-02-2011, 08:31 PM -
Hypertherm Powermax45 Ohmic Sensor as Homing Switch
By Voodoo Vintage in forum Hypertherm PlasmaReplies: 8Last Post: 01-31-2011, 02:05 PM -
Hypertherm Sensor PHC and Mach 3
By dpaish in forum Waterjet General TopicsReplies: 0Last Post: 07-15-2009, 06:13 PM
Tags for this Thread
Posting Permissions
