[JerryFlyGuy]

Does anyone have listings of casting suppliers in Canada? I'm looking at maybe casting a couple pc's of alum but don't have anything to do it w/ as of yet. I'm looking for suppliers for refractory and crucibles and sand etc.. I've got lots of old trany's and engines which I plan to bash up into smaller pc's and re-cast into something usable.

Thanks!
Jerry

[Weldtutor]

I'm looking for suppliers for refractory
Jerry

Try this link for refractory materials in Ontario.
http://www.pshcanada.com/kilnbuilding.htm

[JerryFlyGuy]

Thanks Weldtutor... I took a look, unfortunatly it looks like that site is more for pottery and smaller stuff, they only sell fire bricks not a pourable [like cement] refractory.. Look's like I'll have to keep looking..

Jerry

[Weldtutor]

Jerry This link might help for your supplies.
http://www.synergetic.on.ca/
It is an associate of PSH, who do in fact supply
castable refractories, but you need to send them an email to request info for items not shown in their catalogue & web listings.

[Tig]

Hi Jerry,
Check out Clayburn Industries Ltd.
Clayburn Refractories Ltd.
They have an outlet in Ontario. Phone: (905) 892-8861
Their head office is:
33765 Pine Street
Abbotsford, BC Canada V2S 5C1
Phone: (604) 859-5288; (604) 526-4211
Fax: (604) 859-0424; (604) 859-2923
Internet: www.clayburngroup.com
Also for Refractory mortar and brick look at A.P. Green products they are readily available in Canada.
Tig

[flyeribe]

Does anyone have listings of casting suppliers in Canada? I'm looking at maybe casting a couple pc's of alum but don't have anything to do it w/ as of yet. I'm looking for suppliers for refractory and crucibles and sand etc.. I've got lots of old trany's and engines which I plan to bash up into smaller pc's and re-cast into something usable.

Thanks!
Jerry

Where are you from Jerryflyguy. I'm in Ottawa area if that helps you out any.

Luke

[JerryFlyGuy]

I'm a long ways away Luke, I'm located in Sask. so pretty much far away from anyone who sells this stuff.. [or so it would appear] I've got a couple email out to people, we'll see how it goes. I might just put this whole casting thing on hold until I am better set up to do it.

Jerry