586,069 active members*
3,554 visitors online*
Register for free
Login

Thread: Tool Problem

Results 1 to 2 of 2
  1. 04-28-2015, 08:51 AM #1
    Florinbv
    Florinbv is offline Registered
    Join Date
    Feb 2015
    Posts
    29

    Tool Problem

    So i have different milling sides that i make with 1 tool, but the program combines them into 1 program, and i need a separate program for each side.(finish 1 side, retract to Z, start the other side etc)
    Reply With Quote Reply With Quote
  2. 04-28-2015, 08:55 AM #2
    Florinbv
    Florinbv is offline Registered
    Join Date
    Feb 2015
    Posts
    29

    Re: Tool Problem

    Oh, nvm, i edited the PP and it worked....
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fanuc 0-T Tool wear / tool length compensation problem
    By Beliathan in forum Fanuc
    Replies: 7
    Last Post: 01-23-2013, 05:46 PM
  2. Tool mix up problem 0i-MC
    By Adaware in forum Fanuc
    Replies: 6
    Last Post: 08-24-2012, 05:14 PM
  3. TOOL RECOVER PROBLEM
    By razzz in forum Haas Mills
    Replies: 2
    Last Post: 01-25-2012, 02:44 AM
  4. knurling tool problem
    By jamie2913 in forum Haas Lathes
    Replies: 1
    Last Post: 08-06-2010, 04:16 PM
  5. Tool # problem
    By Powder Keg in forum Fanuc
    Replies: 8
    Last Post: 01-18-2008, 05:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules