I recently acquired a Dyna 2200 tabletop CNC 100% working, as far as I can tell, with the controller. I have been researching intently on cnczone, as well as other places, to find a piece of CAD/CAM software that will load programs to the 2200 without retrofitting or any modifications. From my research, it seems that retrofitting does have its advantages especially in the program download time, but I would like to use the machine in in its original state first. In previous thread on cnczone, it was mentioned that Mastercam was used to design and upload programs to the 2200. Is there a better or more accessible software that will let me design and upload programs to the 2200, or is Mastercam where it's at? If so, could I also get the version of Mastercam that would be best (from my research, x7 is the most recent that would be compatible due to the 32bit operating system requirement).

As always, any help and information would be greatly appreciated.