[jtexcellon]

I have a Maya Seiki GA-2600 with a Fanuc Oi-TB. Was running great, then I got a ZRTN 224 error that was corrected with new batteries on the servo. As soon as that error went away, I get a 2042 Turret Alarm and the turret will no longer index. I am stuck. Any ideas? thanks, John

[hrh]

FS-0iTB is probably fitted with a Beta drive on I/O link.

Press SYSTEM button once.
Press the => right-hand softkey at the bottom of the screen until one of the softkeys indicate PMM
Press the PMM softkey. (The screen should indicate Power-Mate Manager. If there is no I/O Link, there will be a message: " NO I/O LINK OPTION") [Refer to machines manual for turret reference procedure. Let me know if you have X, Z and "3" adresses on parameter 1815 on the CNC parameters]
SYSTEM and MESSAGE softkeys will appear.
Press MESSAGE.
Check which message appears and let us know.
Under SYSTEM of the PMM screen you can check the PMM parameters. Let us know the value of parameter 11