Im in need of some help..Jinan Itech is just ignoring my emails now,since I have the machine.
It uses LaserSoft ,which I have it set to Top Left for the home position, yet when I reset ,it always goes to about midways on the Y and to the right on X. The machine is a 1300 x 900 platform, yet it seems to think its only 500 x 40. (I guess) not sure what it thinks the size is, even though I have it set to 1300x900 in the parameters.
The factory settings on the machine is asking for a password, so Im unable to check what its set at.
Next problem...
when using the LaserSoft program, importing from Corel X5, its taking my engrave vectors, which are color filled, and changing the color where they over lap. Its also resizing the design,according to the program,making it alot bigger.
and the next problem.. when uploading the file to the machine, its flipping the design,so its backwards...
any help on these would greatly be appreciated.