586,069 active members*
3,729 visitors online*
Register for free
Login

Thread: Fanuc OT control Auto Button

Results 1 to 4 of 4
  1. 11-10-2006, 04:40 PM #1
    thardy
    thardy is offline Registered
    Join Date
    Sep 2006
    Posts
    10

    Fanuc OT control Auto Button

    I'm having problems with a fanuc OT control. First I had a Ram Parity Error. I cleared the memory and entered all the parameters.
    Now the Auto button doesn't want to work. Whenever I hit Auto, it goes into MDI instead.
    Could this be a parameter setting? I changed keypads in the controller and it still does the same thing.
    Thanks for any help,
    T. Hardy
    Reply With Quote Reply With Quote
  2. 11-12-2006, 12:03 PM #2
    harshgangrade
    harshgangrade is offline Registered
    Join Date
    Nov 2006
    Posts
    14
    are you getting other modes like jog etc.
    have you reference the machine again
    Reply With Quote Reply With Quote
  3. 11-12-2006, 04:22 PM #3
    thardy
    thardy is offline Registered
    Join Date
    Sep 2006
    Posts
    10
    Edit, MDI, Jog and all of that works. It is an Operator Panel A026-0083-C141
    Reply With Quote Reply With Quote
  4. 11-12-2006, 04:52 PM #4
    cncdiag
    cncdiag is offline Member
    Join Date
    Apr 2006
    Posts
    213
    Did you reload all the 900 parameters
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules