[flesvik]

Hi.
I am making a part with a lot of inside corners and i am using the Bisect line function in the 2D profiling function in BobCad Cam to relive the corners. But on squares it does not seem to work. It only takes 3 of the 4 corners evry time. See the picture:

As you can see the bottom left corner is not relived like the others.

Is there any fix for this? I don't really want to make the relive cuts manually by putting a circle in every corner when there is a function already in the program that is suppose to do this for me.

[jrmach]

You cannot have your chain start in the corner.For example,,if you are doing a square,take one of the lines and break in half.Start your chain from there and all corners will bisect.
Let me know if you need more explanation.I can video if needed.

[BurrMan]

Yeah, you can just use the start point in the feature and right click-modify and be sure to set it at a middle point of one of the sides.

[flesvik]

Ok. Where do i select the start point?

EDIT: Never mind, i found out.

Tank you of the help, that solved my problem.