Am working on the dust system for my CNCRP PRO 4848 with the 2.2kw spindle. Is there any set up needed in mach3 to run the two relays provided? Or is it as simple as plug in power to the relay and add what ever motor to the output and it will power up with the spindle?
Results 1 to 4 of 4
-
06-07-2015, 01:43 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 118
Question on the relays CRP800-00E-5
-
06-07-2015, 04:47 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Question on the relays CRP800-00E-5
Is the relay rated to handle your dust collector motor?
-
06-07-2015, 05:07 PM #3
Registered
- Join Date
- Apr 2006
- Posts
- 118
Re: Question on the relays CRP800-00E-5
Hi Ger,
Originally Posted by ger21
Right now it is just a 6 amp shop vac, so yes.
I've been on the CNCRP web site to see if I can find info on it in detail. Most it says is the AUX power outlets are to run a router and a dust collector. No amp limits given that I can find. Looking at the relays don't tell me much either.
-
06-08-2015, 06:23 PM #4
Company Representative
- Join Date
- Feb 2004
- Posts
- 1086
Re: Question on the relays CRP800-00E-5
Hi all,
The relays in the CRP800 system are rated for 15A (and can run at either 110 or 220V, although the output plugs are currently set up for 110V).
Best regards,
Ahren
CNCRouterParts
Reply With QuoteSimilar Threads
-
3 relays
By Kammo in forum CNC Machine Related ElectronicsReplies: 0Last Post: 04-18-2015, 07:11 AM -
why do relays get hot
By contactirfu in forum CNC Machine Related ElectronicsReplies: 6Last Post: 02-09-2009, 01:35 PM -
Relays
By 1ctoolfool in forum Haas MillsReplies: 4Last Post: 12-17-2008, 11:33 PM -
relays
By fourperf in forum FadalReplies: 10Last Post: 01-15-2007, 05:41 AM -
OT Relays?
By Grue in forum CNC Machine Related ElectronicsReplies: 0Last Post: 04-28-2004, 09:10 PM
Tags for this Thread
Posting Permissions
