Greetings everyone, First time posting here. A couple weeks ago I bought a Pratt and Whitney Turnmate with a Fanuc 5t Controller, it came with Manuals and a BTR board. Well turns out the manuals I have are for a Fanuc 3000c controller, Why I got manuals for a Mill with this lathe is beyond me. So first things first, i went out and bought a 15hp Phase Converter, and wired that in plus the machine last night. Flip all three breakers (Main Breaker, Phase Converter on switch, and Breaker on the machine.) Hit the On button and bam, it fires up. Woot! Well now comes the fun part. The back up batteries have Long since died, this machine has been sitting for 13 years form the guy i bought it from, and Who knows how long before he got it. I replaced one of the two batterys with a custom made 4.5v AAA x3 battery pack. But there was only one battery pack in the cabinet. Since I do not have the correct manual for this machine, can some one point me out the battery locations?

I have a sheet that's very faded but readable that claims to have the machine parameters on it. I've tried entering parameters with the switch behind the Display Readout switched to PRG, But the control won't except Any keystrokes, except changing the Address and Numbers. I can't zero the machine, Jog it, nothing, only thing that works is the coolant switch.

So if anyone has any experience or resources they could share with me, that would be Very helpful.

Here are some pictures.

Edit: I found the second battery terminal by trial and error (Luckily One trial and zero error). So Both battery lights are out on the PCB's and the Controller display, only LED lights left are Label Skip which I understand that, so no problem there, and the LED light for the address bar, which moves freely when I press the address keys. Still can't input any data. or Log anything.