That should be correct. From what I now understand you bypassing the relay on the DAC and driving the on off trigger to the laser controller with a relay that will operate with 5V 24 ma. That way your not using a relay to drive a relay to turn on the laser.Originally Posted by jbvries
Results 1 to 20 of 45
Hybrid View
-
11-03-2015, 10:31 PM #1
Registered
- Join Date
- Apr 2006
- Posts
- 118
Re: Looking at adding a J Tech laser to a CNCRP PRO 4848
Reply With QuoteSimilar Threads
-
Pro 4848 vs Standard 4848 - Total Build
By pdwatermelon in forum Avid CNCReplies: 20Last Post: 06-26-2016, 02:57 PM -
CNCRP 4848 Prep.
By tangeray in forum DIY CNC Router Table MachinesReplies: 35Last Post: 08-04-2013, 11:44 PM -
Adding Smooth Stepper to DMM Tech DMB4250-8B
By gt40 in forum Dmm TechnologyReplies: 12Last Post: 01-07-2013, 04:16 PM -
Adding a laser to a CNC - any FAQ's around?
By mcphill in forum Laser Engraving / Cutting Machine General TopicsReplies: 8Last Post: 07-05-2009, 09:19 PM -
adding a laser to my CNC...
By jdbaker in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 11-17-2005, 02:06 AM
Tags for this Thread
Posting Permissions
