well, i deleted the old copy on the slave and loaded it up on the new hard drive and now it wants a new registration key! AAAHHHH
for some reason when i try to register this it says i opted out of the internet and wants to do it manually?
thanks matt
Results 1 to 2 of 2
-
06-13-2015, 04:08 PM #1
Registered
- Join Date
- Oct 2009
- Posts
- 230
new hard drive with dolphin on the slave drive question
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
-
06-13-2015, 08:53 PM #2
Gold Member
- Join Date
- Jun 2004
- Posts
- 6618
Re: new hard drive with dolphin on the slave drive question
I had a similar issue recently.
Contact the US distributor and he should be able to fix you up.
He sent a new file for be. It did not work correctly the first few times, but then after a reboot, it worked as it should have.Lee
Reply With QuoteSimilar Threads
-
Bad Hard Drive
By judleroy in forum HURCOReplies: 33Last Post: 05-02-2022, 02:27 PM -
Cen 6 upgrade question RE Simdisk ><Sold State hard drive
By stan_mcdonald in forum MilltronicsReplies: 7Last Post: 12-02-2014, 10:51 PM -
DX32 hard drive (DOM Flash thumb drive) replacement procedures. WIP
By Cellar Dweller in forum Bridgeport / Hardinge MillsReplies: 4Last Post: 01-06-2012, 05:26 AM -
Setting Up Slave Drive
By rayzsurfer in forum Waterjet General TopicsReplies: 2Last Post: 11-28-2011, 04:51 PM -
HAAS VF3 hard drive or no hard drive
By teal854t in forum Haas MillsReplies: 2Last Post: 08-18-2010, 03:27 PM
Tags for this Thread
Posting Permissions
