Does anyone know the parameter to turn on the M8 (mist) option and the macro option? It's for a Matsuura MC-510V with a Yasnac MX-3 control. A options parameter list would be great if possible.
Does anyone know the parameter to turn on the M8 (mist) option and the macro option? It's for a Matsuura MC-510V with a Yasnac MX-3 control. A options parameter list would be great if possible.
shas595 (John?)
short question for you. On a hitachi Seiki Micon-16, Seicos-II, when the battery dies you loose slbus data and parameters. Is the ladder lost or does that happen because of other problems?
Dan
Hello Dan,
If John can not help you. WE would be happy to assist it sounds like you need a reload on your seiki. Let us know if you need any information about your machine or parts as we have a vast inventory of parts available. [email protected].
-A.J
Hello Vanki if you still need help with your VS50 we have parameters as well as loading procedures amongst parts for your Seiki machine. Contact us directly at [email protected].
We will be happy to assist.
-A.J
hello ,i lost my Hitachi Seiki TF-20 Powermate sram,i need you help! can someone send it to me? or i can pay for it , thanks!! my gmail :[email protected]
hi i have a problem on a vk45II machine with SEICOS lampda 10M. Error 699 Directory broken Can you help me?
hi i have a problem on a vk45II machine with SEICOS lampda 10M. Error 699 Directory broken Can you help me?
dear friends,
i have hitachi seiki vm40 with seicos my3...
after on:
it cannot to booting because : motion rtc unready...alarm,
the 5. led (akku) is dark !!
i replaced the akku , but the alarm no changed
can anybody write to me what is the problem ?
i have no parameters ( if they lost…i think that)
can anybody send the procedure to mend machine and
can anybody send the parameters?
regards, kiss
I need service on ht25s and ht 23s nethier machine will start alsovg45 please contact Dave at sterling precision at 860-564-4043
Does anyone have the parameters required to turn on some of the options on the YASNAC MX3 control? I have a Matsuura MC-510V and have contacted Matsuura who said it's no longer supported and that they would try to get the information from Yaskawa who said the same. I'm out of options as far as getting them from the manufacturer as it's no longer supported and am looking for help keeping the control useful.
Hi John
I have a Hitec-Turn 20SII with a Seicos LIII control. We just had to replace the power supply. the machine was down for 4 months waiting on the new power supply. Now at power up we are getting a "[1009] HI SYSTEM TABLE ERROR" and another screen that just says "SYSTEM TABLE CHECK-SUM ERROR" There is also a battery warning, Could it be that the battery got low enough in the 4 months of down time to corrupt some files but not loose them completely? There was a program loaded in the machine when we shut it down 4 months ago, that program is still there and looks correct.
Jeff
If it aint broke, fix it till it is.
hi i have hitachi seiki 25r when uploading a program with the rs232 cable the machine froze i had to turn off the machine when i turned it on all of the programs were gone when i try to access the program list its empty and the machine freezes if i try to upload a new program the machine freezes when i access the input page need help thanks