HITEC-TURN 23SII When we press standby, hydraulic punp starts and shuts off within seconds.
Unable to swith screen from the initial startup menu.
Uncertain if serial no 2320 is actual serial number, plate is elegible this is the
only number on the plate.
Unknown alarms for this one because we can not pass the initial start up screen.


HITEC-TURN 20SII When we press standby, hydraulic pump starts and shuts off within seconds.
These are the alarms we are getting;
392 Z-Axis TG disconnected
390 ServoPack Alarm
310 Power for Servo not supplied

Need help getting these two machines running - We are located in Lula, GA 30554