[jeffofx]

Geckodrive G540 Multiaxis Step Drive

I Have two, fresh units with test result paperwork from Geckodrive. $190 plus shipping per each unit. ($100 savings)

The G540 is a complete 4-axis system which plugs directly into your computer via the parallel port and to your motors through DB9 connectors.

It contains four G250 drives, an integrated breakout board to control a router or plasma torch, and a hard anodized aluminum case.


Four 10-Microstep motor drives
0 to 3.5A rated phase current
18VDC to 50VDC supply voltage
Mid-band resonance compensation
Auto standby current (70% current)
Optoisolation on all LPT signal pins
Two 1A at 0 to 50VDC rated outputs
Four SPST to GND inputs (TTL)
FAULT indicator LED,signal to PC
POWER indicator LED
I-SET resistor on motor connector
TRIM adjust for motor smoothness
Panel mount (5.7? by 2.4? hole dim.)
Anodized aluminum package
10kHz watchdog timer (charge pump)
Optoisolated analog output for a VFD drive



List Date: 6/29/2015

For more info, click here to view the original listing: Geckodrive G540 Multiaxis Step Drive
--------------------------------------
On Sale For: $207.14 + $10.00 Shipping


--------------------------------------



Mobile friendly version: Geckodrive G540 Multiaxis Step Drive

Go Mobile: Download the free Panjo iOS app now!

[Drools]

fresh = new?

[jeffofx]

They were technically hooked up so they are technically not new. They are like new and I couldn't tell the difference.