Hi,
I have been working on this cnc controller for weeks now and i have solved some of the problem but there is one i am having trouble with. First off here are the specs
Renco Encoder
MagTek Motor
Gecko G320x Drivers
C10 BOB
Mach 3
I am having trouble with the motor not running smooth, and will jump all over the place. The G320x's will pickup the step from the BOB (lights change direction is sent) and the step from the encoder (also, lights change when encoder is moved) but when i plug in the motor it will throw faults and be jumpy and jittery.
Here is a video
https://www.youtube.com/watch?v=BJP5hyFckKU
Thanks
Mike