I bought a 6040 cnc mechanical kit only I'm new to CNC and don't have much experience with the appropriate setup for the machine . If anybody could give me some info and recommendations it would be very appreciated .
I bought a 6040 cnc mechanical kit only I'm new to CNC and don't have much experience with the appropriate setup for the machine . If anybody could give me some info and recommendations it would be very appreciated .
So you don't have motors yet?
Use this page to calculate the wattage you need to move
techref.massmind.org/techref/io/stepper/estimate.htm
then decide on the motors and drivers based on that.
Whatever you do, do NOT purchase a TB6065 based driver from eBay.
James hosts the single best wiki page about steppers for CNC hobbyists on the net:
http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)