[najama2]

Hello, the default machine definition in Mastercam only allows for a maximum of 50,000 RPM for the spindle speed. Is there a way for me to run it at 60,000 RPM? Where can I acquire a machine definition that would allow me to do this?

Thank you.

[Bm150]

You should be able to change this inside the machine def.

[najama2]

You should be able to change this inside the machine def.

I'm not quite sure how. I tried googling it but couldn't really find much.

[Bm150]

I'll do some screen shots. Brb

[Bm150]

Ok, start by selecting this from the menu, Mastercam version shouldn't matter
Attachment 287468
Then click open
Attachment 287470
Select your machine from the list
Attachment 287472
Once open double tap on the spindle
Attachment 287474
Change this value to what you need .
Once done save as you exit and should be fine.
When working with already saved mastercam files you may need to reload the machine.
This is done via files on the OPs Toolbar.

[najama2]

Wow, thank you so much! That worked flawlessly. Thanks once again.